- Simple structure, KKmulticopter is easy to Maintain and Debug Control
- With 3 pcs gyros, relying on potentiometer adjust gyro sensitivity.
- Full servo signal output, support normal ESC / analog servo
- Support for single-axis / UFO, Y3 3-axis, Y4-type 3-axis, 4 axis, 6 axis, V22  flight mode
- Supports 4-axis “+” and “X” flight mode, support for six-axis “HEXA6″ and “Y6″  flight mode.
- Don’t need MK 4-axis PPM decoder board, the receiver can be connected directly  to the Transmitter

Package included:　
- 1 x 4-axis Circuit Board

The KKmulticopter is a KK flight controller board for remote control multicopters with 2,3,4 and 6 rotors. We get KKmulticopter to stablise the aircraft during flight. KK flight controller takes the signal from the three gyros on the board (roll, pitch and yaw) and feeds the information into the Integrated Circuit (Atmega IC). KK flight controller then processes the information according the the KK software and sends out a control signal to the Electronic Speed Controllers (ESCs) which are plugged onto the board and also connected to the motors. Depending upon the signal from the IC the ESCs will either speed up or slow down the motors (and tilt the rear rotor with a servo in a Tricopter) in order to establish level flight.

The board of KKmulticopter also takes a control signal from the Remote Control Receiver (RX) and feeds this into the IC via the aileron, elevator, throttle and rudder pins on the board. After processing this information, the IC will then send out a signal to the motors (Via the M1 to M6 pins on the board) to speed up or slow down to achieve controlled flight (up, down, backwards, forwards, left, right, yaw) on the command from the RC Pilot sent via his Transmitter (TX). In the case of a Tricopter, one of the pin connectors (M4) will control a servo to achieve yaw authority.

The v.5.5 has an Atmega168 chip on board and an ISP header which gives users the option to tweak and upload their own controller code.

also we supply config, you can get KK flight controller at the link below,

Connection Digram

Application
- Single female: words off unwanted dates or solicitation
- Home alone children: wards off villains
- Call screen: bypasses answering undesired phone calls, reduces harassment calls.
- SOHO, One-Man company: makes other think there are many employees.
- Wives: spy on husbands
- Detectives, spies: spy hoodlums, suspects.
- People: entertains friends and family members

Specifications
- Volume with Power on / off
- MIC: speech input piece
- LED indicator: power indicator (faded red means low batter; no light means no battery)
- Pitch adjuster: (8 selections: 3 high, 3 low, one normal, 1ET)
- Sound insulator: used to block out noise interference
- Speaker: Voice output piece (fits over phone mouth piece)
- Size: 89mm x 60mm x 22mm

Package Contents: (ALL BRAND NEW) 
- 1 x Telephone Voice Changer
- 1 x User Manual

Control 4 light switch uses pairing coding, ultra high frequency encryption eliminates environmental interference. Remote control range is up to 50 meters, not obstructed by walls, capable of connecting any loads. Remote controller and switch can be used simultaneously for ease and flexibility.

Features:
- Control 4 light switch is fixed wall 4 channels light ON/ OFF switch with remote control
- Uses pairing coding; ultra high frequency encryption eliminates environmental interference
- Remote control range is up to 50 meters, not obstructed by walls
- Remote controller and switch can be used simultaneously for ease and flexibility
- Remote & manual operation
- Makes your life more convenient
- Fast, easy installation
- Just a remote controller, you can easily control the electrical appliances at home
- Remote control powered by one 23A/12V battery (included)
- Remote Range: 50M
- Power limit: <= 500W per Channel
- Standard 86-type outer casing
- Input: AC 200V-240V (50-60Hz)
- Receive Size: 85 x 85 x 35mm (L x W x H)
- Controller Size: 94 x 43 x 14mm (L x W x H)
- Color: White with Silver
- NOTE: For the indoor use only

Package included:
- 1 x 4-Channel Remote Control with Holder
- 1 x Receiver Switch Box
- 1 x 23A/12V Battery

Tags: control 4 light switch, control 4 light switchs, wireless wall switch

Brand new gsm remote camera, 300K pixel camera pixel, 6 meter best shooting distance in night. The GSM remote camera is a remote images capturing device with a detect sensor, microphone, infrared lights and high quality camera.
You can also connect wireless sensors (433MHz or 315 MHz, Max.15 units), such as door magnet, pir sensor, smoke sensor, gas sensor etc. The remote security camera can report alarm from all sensors connected. Camera can send alarm both by SMS, MMS, email and by standard phone-call. The home security camera can send MMS images to any preset email. It will make your life safer and easier.
Features:
- Mobile Alarm: Capture images and Send to your mobile phone by MMS.
- SMS Remote Control: Control the camera by sending SMS commands.
- Real Time audio: Call the camera and listen in.
- Motion Detection: Detect any motion within the monitoring area and send alarm.
- External Connection: Connect wireless sensors (Max. 15), such as door magnet,pir sensor, smoke sensor, gas sensor etc. The camera can report alarm from all sensors connected.
- Infrared Light: The build-in IR light enables the camera to capture images in dark environment.
- Resolution: 300.00 pixel CMOS camera.
- Watch images directly on your mobile phone: The camera sends MMS images to your mobile phone for you to watch anywhere, anytime.
- Receive images by email: The camera can send MMS images to any preset email.
- Multi Alarm: Camera can send alarm both by SMS,MMS, email and by standard phone-call once motion is detected.
- Monitoring Methods: Choose between manually or scheduled monitoring.
- Remote Control: Include 2 remote controls for manual operation on/off and panic button.
- Bulit-in lithium battery: Rechargeable battery ensuring operation in case of external power failure
Specifications:

Package included:
- 1 x Camera Host
- 2 x Remote Control
- 1 x Power Adapter
- 1 x Wireless Sensor

Features:
- pir sensor module can accurately detect any moving objects (e.g. human body) within the detective range and will send out signals of high level for a certain time. pir sensor module has higher sensitivity and broader detective range than others.
- Completely automatic induction: once a person enters into the detective range, the output is high level. While the person is out of the detective range, pir motion sensor module will prolong automatically 20 seconds of retention time then the high level output will be shifted to the low level output.
- Triggering method: repeated triggering, which means that it will take the last triggering time as the starting point, within 20 seconds of the high level output, if there’s still human beings activities within it’s detective zone, the output will be maintained in the high level until the person’s leave.
- Then afterwards, a retention time of 20 seconds will be initiated.
- Broad working voltage, low power consumption.
- High level signal output, easy to be jointed with different types of circuits.
- pir motion detector module is widely accepted and has been applied for movement detection, automatic control, proximity switch, electronic theft prevention, safety protection, remote control measurement.

Specifications:
- Operating temperature range: -20℃~+70℃
- Working voltage: DC 5V~9V
- Working current: 5mA
- Static current: <50uA
- Output high voltage: 4V
- Retention time of high level output: 20 seconds
- Detective range: 2~3m (Normal)
- Detective angle: <140°
- Triggering method: repeated triggering
- Dimensions: 27mm × 12mm × 12mm
- Weight: 2g / 0.07oz

Tags: infrared detector module, pir motion detector module, pir motion sensor module, pir sensor module

Features:
- Safety battery back up siren make sure your electrical device is safe,electric siren will alarm when some on cut off the power
- The red and black cable for recharge the battery, red one connect anode, black one connect cathode
- White and blue cable for connect the device power, white one connect anode, blue one connect cathode, if the key switch on the ON position, electronic siren will alarm just the power is cut off
- Metal Stand design can be install on the wall
- Ideal for PC, TV and other electrical device safety use, should be use a AC to DC voltage convertor if the power is AC 110 or 220V

Specifications:
- Product Name: Battery Back Up Siren
- Use for: Electrical Items Alarm
- Material: Plastic, Electrical Parts
- Rated Voltage: DC 12V
- Work Voltage: DC 7-13V
- Power: 20W
- DB/M: 105db
- Battery Type: Nickel-cadmium 6V 600mAh
- Cable length:38cm
- Color: Black
- Size: 7.5 x 6.5 x 8cm/ 3 x 2.6 x 3.15 inch(L*W*H)
- Net Weight: 274g

Features:
- Air Erasable Pen/Auto Vanishing Pen/Disappearing Ink Pen/Magic Pen
- Non-toxic, harmless and pollution-free
- Vanishing Pen lead color: Blue, neutral and replaceable
- Able to doodle on paper, clothes, sheet, furniture, wall and any other smooth surface
- The handwriting disappears without any mark within 4-24 hours. Higher the temperature, more quickly magic ballpoint pen disappears
- Green plastics are taken for the penholder and cap,while bonded fiber for the head
-  As advanced water decomposition technology is adopted, our pen is non-toxic,harmless and pollution-free

Tags: disappearing ink pen, disappearing pen, vanishing ink pen, Vanishing Pen